|
Written by Administrator
|
|
Sunday, 03 January 2010 16:56 |
|
SAX-125.2
The Sundown Audio SAX-125.2 was designed to be a flexible amplifier suited to multiple applications. Equally at home running a pair of component speakers, a pair of midbass or tweeters in an active setup, or a subwoofer in a lower power or sound quality focused installation, the Sundown Audio SAX125.2 is a fantastic sounding amplifier with the legendary Sundown Audio reliability, designed to satisfy the discerning audiophile who doesn't necessarily want to spend huge sums of money to get great results, the SAX-125.2 utilizes high quality Sanken bipolar output transistors, and 12 of them at that!
Like all Sundown Audio products the SAX-125.2 is an amplifier with a second to none reputation for reliability, even under the most arduous of applications. With the 2 year warranty on all Sundown Audio amplifiers, we are confident that they are the best products of their type on the market!
UK MSRP £249.99
-
2/1 Channel Bridgeable Class-AB Amplifier
-
MOSFET PWM Power Supply
-
Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
-
12dB Octave Electronic Crossover Slope
-
Variable Subsonic Filter
-
High Pass Filter Variable with x 10 Range Selectable Switch
-
Low Pass Filter Variable with x 10 Range Selectable Switch
-
HPF/FULL/LPF Selectable Switch
-
Variable Bass Boost Control
-
Variable Bass-Boost Frequency Control
-
Variable Input Level Control
-
Input Sensitivity : 200mV ~ 6V
-
Subsonic Filter : 10Hz ~ 500Hz
-
Signal Input and Line Out RCA Connectors
-
Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
-
Tested Voltage & THD: 14.4V & Less than 0.05% THD
-
Operating Voltage : DC10V~16V Power Input
-
Wired Remote Controller
|
Rated power output
|
|
|
----RMS power, 4 ohm stereo
|
125W x 2CH
|
|
----RMS power, 2 ohm stereo
|
200W x 2CH
|
|
----RMS power, 4 ohm bridged
|
400W x 1CH
|
|
Signal to Noise Ratio
|
>90dB
|
|
Low pass frequency crossover
|
50Hz ~ 5KHz
|
|
High Pass Crossover
|
30Hz ~ 3KHz
|
|
Variable Subsonic Filter
|
10Hz to 500Hz
|
|
Bass Boost
|
0~18dB
|
|
Variable Bass-Boost Frequency Control
|
35Hz to 120Hz
|
|
Frequency Response
|
10Hz ~ 40KHz (+/-1dB)
|
|
THD@RMS Watts
|
<0.1%
|
|
Channel Separation
|
75dB
|
|
Fuse Rating
|
20A x 3
|
|
Input Sensitivity
|
Variable 200mV~6V (+/- 5%)
|
|
Dimensions
|
252(W) x 58(H) x 340(L)mm
|
|
|
|
Last Updated on Monday, 25 January 2010 14:44 |