|
Written by Administrator
|
|
Sunday, 03 January 2010 16:50 |
SAX-100.4D
The Sundown Audio SAX-100.4 amplifier is built to the same exacting standards as the Sundown SAX-125.2 but adds another set of channels and more advanced crossovers.
It's flexible crossovers allow the user to run a 2-way active speaker setup with no external processing. It packs enough punch that one could also run a set of front speakers with one pair of channels and a subwoofer, bridged, on the other pair of channels for use as a total system amplifier where high power is not required.
Once again it is equally at home driving the best components the world has to offer, with a lean but full sound quality, and vast reserves of current capability for the most demanding source material.
The latest "D" revision features industry leading crossover flexibility even more advanced than prior versions and also features an upgraded power supply section for more power and enhanced longevity.
Like all Sundown Audio products the SAX-100.4 is an amplifier with a second to none reputation for reliability, even under the most arduous of applications. With the 2 year warranty on all Sundown Audio amplifiers, we are confident that they are the best products of their type on the market!
UK MSRP £399.99
SPECIFICATIONS:
- 4/3/2 Channel Bridgeable Class-AB Amplifier
- MOSFET PWM Power Supply
- Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
- Variable Subsonic Filter
- Independent 1/2 and 3/4 Channel High Pass Filter Variable
- with x 10 Range Selectable Switch
- Independent 1/2 and 3/4 Channel Low Pass Filter Variable
- with x 10 Range Selectable Switch
- HPF/FULL/LPF Selectable Switch
- Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable
- Switch with 12dB and 24dB Octave
- Variable Input Level Control
- Input Sensitivity : 200mV ~ 6V
- Subsonic Filter : 10Hz ~ 500Hz
- Signal Input and Line Out RCA Connectors
- Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
- Tested Voltage & THD: 14.4V & Less than 0.05% THD
- Operating Voltage : DC10V~16V Power Input
- Wired Remote Controller
| Rated power output |
|
|
----RMS power, 4 ohm stereo
|
100W x 4CH |
|
----RMS power, 2 ohm stereo
|
160W x 4CH |
|
----RMS power, 4 ohm bridged
|
320W x 2CH |
| Signal to Noise Ratio |
>90dB |
Low pass frequency crossover
|
50Hz~500Hz (CH1&2)
50Hz~5KHz (CH3&4) |
|
High Pass Crossover
|
50Hz~5KHz (CH1&2)
50Hz~500Hz (CH3&4) |
| Variable Subsonic Filter |
10Hz to 500Hz |
| Frequency Response |
10Hz ~ 40KHz (+/-1dB) |
| Bass Boost |
0~18dB |
| Variable Bass-Boost Frequency Control |
35Hz to 120Hz |
| Frequency Response |
10Hz ~ 40KHz (+/-1dB) |
| THD@RMS Watts |
<0.1% |
| Channel Separation |
75dB |
| Fuse Rating |
30A x 3 |
| Input Sensitivity |
Variable 200mV~6V (+/- 5%) |
| Dimensions |
252(W) x 58(H) x 480(L)mm
|
|
|
Last Updated on Monday, 25 January 2010 14:36 |
Sundown Audio
